Help Center

575N5 operating steps?

Pls check your computer before install. If your computer or notebook is window 7 or above system, Pls manually modify the IP address of it, make your computer IP and the wifi repeater IP are the same. After you completed the configuration, You must remember change it to” Automatically obtain an IP address” and “Automatically obtain DNS server address”, otherwise it will cannot connect to the network.
Repeater Mode Installation Steps:
1. Click the network icon on the right bottom of your desktop. (Mobile phone pls open WLAN) Then find the signal and connect it.
2. Open web browser and type “” or “ap.setup” in the browser address box and the login screen will appear. (use “address box” but not “search box”)
3. Enter the Username and Password. Both of them are “admin” then click submit.
4. After logging in, you will see the web page: choose the Repeater mode. Then select a wireless network that you want to connect.
5. You will see two different Repeater ssid, 2.4G and 5G, select one and remember to change the name (maybe “sinobry”) And the Security key must be your wireless router’s password. Then click “Apply”.
6. Click the network icon on the right bottom of your desktop. Then find the wireless network signal “sinobry”which you have changed in step 5. Then connect it (you must use you wireless router’s password.)
7.Open web browser then it will work.
If it still cannot connect, In power on situation, pls press the reset button for 8~10 seconds until the wifi lamp light up, then you have succeed restore factory defaults. And you can try again.