FAQ

Help Center

For 518W2 products use problem?

A key to the WPS link steps
Repeater Mode with WPS Button Installation Steps (ensure your wireless router supports WPS function)
1) First you have to switch it to WI-FI repeater mode by hand.
2) Plug the WI-FI repeater into a wall socket
3) Press the WPS on button on the WI-FI repeater for 6 seconds. WPS light will flash for 2 minutes
4) During the 2 minutes, please press the WPS button of your wireless router for 2~3 seconds. It's done and the WI-FI repeater will automatically find the signal.
On your portable devices, you now select the new SSID of the repeater and connect using your own router's password.
Connected to the repeater,But can't open 192.168.10.1 configuration page
1. You can reset the wifi repeater to factory default, then try again. In power on situation, press the reset button for 8~10 seconds until the wifi lamp light up, then you has succeed restore factory defaults. And you can try again.
2. Manually modify the IP address of your computer, make your computer IP and the wifi repeater IP are the same. After you completed the configuration, You must remember change it to” Automatically obtain an IP address ” and “Automatically obtain DNS server address”, otherwise it will cannot connect to the network.
In view of the customer into the repeater landing interface
Hi, my dear friend. Thank you emailed to me and I'm very glad to help you.
When you Open web browser and type “192.186.10.1” or “ap.setup” in the browser address box. Pls notice that you should use the address box but not the search box.
Also, If your computer can search the wireless signal but cannot connect,pls manually modify the IP address of your computer, make your computer IP and the wifi repeater IP are the same. After you completed the configuration, You must remember change it to”Automatically obtain an IP address” and “Automatically obtain DNS server address”, otherwise it will cannot connect to the network.
If it still cannot connect, In power on situation, pls press the reset button for 8~10 seconds until the wifi lamp light up, then you have succeed restore factory defaults. And you can try again.
Any questions pls feel free to contact me. Thank you, have a nice day.